Unknown Usb Device Driver For Windows 10
Note: On rare occasions Windows may not install Device Drivers and you may end up with no USB Ports working. Right-click on Start button and then click on Device Manager. On the Device Manager screen, expand the entry for Universal Serial Bus Controllers. Sometimes your USB device, which is plug-and-play nature really need a set of codes, in this case known as a driver, to interact with your device. If the computer prompts you to install a driver, let it try. If it doesn’t, go to Control Panel Printers and devices to see if there is any Unidentified USB device or Unknown device listed there. Method 2 – Reinstall your external USB driver. If the problem occurs due to corrupted or unstable nature of the external hard drive, then you will need to reinstall and reconnect again. To do that follow these steps: First of all Unplug your USB device from your computer. 1 – Now, Go to: windows 10 search box and search device manager. First, click the Start button and type “device manager”. Then click on the “Device Manager” from the search results to open it. From there, look for the “Universal Serial Bus controllers” option and then right click on each one of the USB drivers and select the Update Driver from the menu. Windows 10: Unknown USB Device (Device Descriptor Request Failed). Hopefully it's more of a Windows 10 driver thing than USB 3.0. Ev1lchris Senior Member.
Summary :
When you encounter the Unknown USB Device Set Address Failed error, you will be unable to use the USB as normal. To solve this issue, we collect some useful solutions and show them in this post. You can try them to help you out.
SanDisk/Seagate External Hard Drive/WD My Passport Set Address Failed
Sometimes, when you connect an external USB device like a WD my passport, Seagate external hard drive, or SanDisk drive to your computer, you may discover that the drive doesn’t work. Then, you can access Device Manager to check whether there is something wrong with the drive.
There are some common errors like:
- Unknown USB Device (Port Reset Failed)
- Unknown USB Device (Set Address Failed)
- And more…
MiniTool Software hasn’t talked about the Unknown USB Device Set Address Failed issue. In this post, we will show you some solutions.
These solutions are available for WD my passport set address failed, Seagate external hard drive set address failed, and SanDisk set address failed. Of course, if you are using other brands of USB devices, they can also work.
If you are sure the exact reason for this issue, you can try these solutions one by one until you find the most suitable one for your case.
How to solve unknown USB device set address failed?
- Modify Power Options
- Update or roll back the device driver
- Use Hardware and Devices Troubleshooter
- Turn off Fast Startup
Solution 1: Modify Power Options
Unknown Usb Device Driver For Windows 10 Latest
If you are using a laptop, you need to check whether the setting in Power Option is set correctly. You can follow these steps to modify Power Options:
1. Press Win+R to open Run.
2. Type cpl and press Enter to directly open Power Options.
3. Click the Change plan settings link that is next to the preferred plan the system selects.
4. Click the Change advanced power settings link to continue.
5. Scroll down to the USB settings section and then set Disable for both the scenarios: On Battery and Plugged in.
6. Click OK to keep the change.
Solution 2: Update or Roll Back the USB Device Driver
If the USB device driver is not up-to-date, the Unknown USB Device Set Address Failed error can appear. On the other hand, this issue can also happen after you update the device driver. You need to verify which situation you are facing and then choose to update or roll back the USB device driver.
If you need to update the device driver, you can refer to this post: How to Update Device Drivers Windows 10 (2 Ways).
If you need to roll back the device driver, you can refer to this post: How to Roll Back a Driver in Windows? A Step-by-Step Guide.
Solution 3: Use Hardware and Devices Troubleshooter
You can also use the Hardware and Devices Troubleshooter to get rid of the Unknown USB Device Set Address Failed issue. You just need to go to Start > Settings > Update & Security > Troubleshoot > Hardware and Devices, and then follow the on-screen guide to do the job.
Solution 4: Turn off Fast Startup
1. Press Win+R to open Run.
2. Type cpl and press Enter to directly open Power Options.
3. Click Choose what the power button does.
4. Click Change settings that are currently unavailable.
5. Uncheck the Turn on fast start-up (recommended).
Download Device Driver Windows 10
Those are the solutions to Unknown USB Device Set Address Failed. We hope they can help you out. Should you have any related issues, you can let us know in the comment.